高端电压小瞬时电流检测仪（耐焊弧检测仪）-（核算机设定）

High voltage low current tester (arc resistance tester) - (computer control)

企业产产品名字大全：耐电弧试验机

Product name: electric arc resistance tester

产品的材质：NDH-A

Product model: NDH - A

满意规范：GB/T 1411-2002《液态隔绝相关材料耐高压得过低电流量脉冲尖端放电的检测》（符合IEC  61621-1997）及ASTM D495等标准化的必须设计制作研制的，并符合国家IEC 149、UL 746A等疲劳试验方法步骤

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

重点适用性依据及用途：

本实验机是确定应该适用减速机、机械和家廷用机械等业的技工用产品、环氧环氧树脂胶和隔绝电阻电阻漆等隔绝电阻电阻产品的耐焊弧焊接性评估，主适用混合物隔绝电阻电阻产品如：产品、聚酯薄膜、环氧环氧树脂、白云母、瓷砖、玻璃钢、隔绝电阻电阻油、隔绝电阻电阻漆、纸壳等材质的耐焊弧焊接性自测；

本试验报告机由计算方法机控制运作，就能够提示现今试验英文动态及试验英文精力，试验英文结速后并导出现今试验英文数据资料，并可彩印.的标准调查行业报告。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 滤油机为左右两合二为一的结构，下端为实操软件系统，上端为经过多次实验发现箱。

2 本成品使用*新智慧管理技术设备，进行挑选方式（IEC或ASTM）可定时开始可靠性试验，并在手机上出现试验台的时候和然而。

3 **性能指标很好，抗干忧专业能力强，检验精度等级高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧放电通断时间段计算误差：低于 ±10ms

2 调压器数量：2kVA

3 固定检验额定电压：12.5kV

4 可靠性试验电压降精密度：±3%

5 电压把控好的精密度：±10%  感应电流检测的要求：1.5%

6 电极片对样品心理压力：（0.5±0.05）N

7 探针村料：钨棒

8 电极材料路程：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 施用自然环境高温：（23±2）℃

10 操作大环境空气湿度：（50±5）%

11 电源线：220V±5%  50Hz  10A

12 实验室检测    具体方法：   国际标准/美标/10 mA 联续/20 mA 连续式/30 mA维持/40 mA连着

13 冲击试验编译程序一下：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 车辆规格型号：

NDH-A    耐脉冲耐压试验仪-微机掌握

NDH-B    耐弧光耐压试验仪-触屏屏设定

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！